Bay Technical Associates BayStack 304 - Manual (Page 59)

Customizing and Managing the BayStack Switches
893-01010-A 3-5
The command line and response area is used by the operator to enter menu
selections and to change parameter data.When changing parameter data, the
command line displays the current parameter and waits for you to enter the new
data, as shown below:
Enter Default Gateway Address: [0.0.0.0]
3
The cursor
) prompts you to enter a new default gateway address. Enter the new data in the
command line.
Menu and Screen Descriptions
The BayStack 303 and 304 switch console interface consists of menu and screen
displays that allow you to manage the switch and monitor its performance. Menus
are provided to allow selection of switch parameters and a means to change and
manipulate them. The screen displays are provided to allow you to view statistics
and status information.
The menu hierarchy, shown in Figure 3-1 , consists of two primary menus: the
Language Selection Menu and the Main Menu.
The following sections describe each menu and screen and its associated submenu
and screen displays.
89301010.BK Page 5 Tuesday, June 10, 1997 8:00 PM