Barco NIO E-2620 - Manual (Page 106)

Display operation
106 Nio® medical display systems
4. Rotate the control wheel to select User Controls.
5. Press the control wheel to switch from “On” to “Off”.
6. Exit the menus.
To enable user controls:
1. Do not use the control wheel for at least 3 seconds.
2. Rotate the control wheel 1 step clockwise.
3. Press the control wheel 2 times.
4. Rotate the control wheel 1 step counterclockwise. The on-
screen display appears.
Note: Steps 2 to 4 must be performed in maximum 3
seconds.
5. Rotate the control wheel to select Settings.
6. Press the control wheel to enter the Settings menu.
Figure 56: Settings menu
7. Rotate the control wheel to select User Controls.
8. Press the control wheel to switch from “Off” to “On”.
9. Exit the menus.
SETTINGS
DPMS On
Power LED On
User Controls Off
EXIT