Barco NIO E-2620 - Manual (Page 27)

Parts, controls and connectors
Nio® medical display systems 27
Rear
Figure 2: Rear side
1. Connector compartment cover
To get access to the connectors, remove the cover by pulling
down the 2 clips at the top of the cover.
2. Tilt & swivel foot cover
This cover is packed in a separate box when the display is
shipped to the customer.
3. Tilt & swivel foot
4. DVI (digital) video input
5. USB upstream port
Connect this connector to the PC USB bus if you wish to
connect USB devices to the display’s USB downstream port.
6. USB downstream port
When the display is connected to the PC USB bus, you can
connect USB devices, such as keyboard, mouse, digital
camera, to this connector.
1
2
3
4 5 6 7
8