Barco NIO E-2620 - Manual (Page 87)

Display settings
Nio® medical display systems 87
numbered icon or by selecting the corresponding display
controller head from the Display drop-down box.
The Display tab allows to view information about the display.
The Graphic board tab allows to view information about the
display controller.
The Calibration tab allows to calibrate the display(s) or view the
result of the last calibration.
Display tab
• In the Display Info section, you can view the name and
serial number of the selected display.
For Nio displays, you can also view:
• To select another display function, select an item from the
Display Function drop-down box.
If the selected display has been calibrated to the selected
display function in the past, the display will be set according
to this calibration. If no former calibration was found, default
factory settings are selected.
When you restart NioWatch, the last selected display function
is automatically selected.
- Lifetime:
- Runtime:
- Firmware version:
- Backlight Stabilization: Operation time including time in stand-by
Operation time excluding time in stand-by
Version of internal display software
Status of the backlight stabilization in the
display.