Barco NIO E-2620 - Manual (Page 122)

Driver re-installation, updates or removal
122 Nio® medical display systems
Driver re-installation, updates or removal
Reinstalling or updating your BarcoMed Nio driver
Note: These instructions apply to Windows 2000 and Windows
XP.
Important for Windows 2000 or Windows XP users only: If you
previously uninstalled the driver, do not allow the Windows Plug
and Play software to reinstall the driver for you.
To reinstall or update only the BarcoMed Nio driver, follow the
steps described in the section “Using the BarcoMed Product
Installation Wizard” with the following changes.
1. Boot your system, and log in using an account with
administrator privileges.
2. Insert your B
ARCO
M
ED
N
IO
Software CD into your computer’s
CD drive. If the “BarcoMed Product Installation Wizard”
doesn’t start within one minute, browse the contents of your
B
ARCO
M
ED
N
IO
Software CD and double click on the file:
“Setup.exe” to start the wizard.
The wizard will begin by displaying the screen shown in
figure 58 below.
Figure 58