Bay Technical Associates RM356 - Manual (Page 115)

Index 3
IP addresses
and NAT 1-12
and the Internet 1-6
assigning 1-6 , 4-1
masquerading 1-3
private 1-11
IP configuration, by DHCP 1-14
IP Mask (destination) field, TCP/IP Filter Rule
menu 8-5
IP Mask (source) field, TCP/IP Filter Rule menu
8-5
IP Protocol field, TCP/IP Filter Rule menu 8-5
IP Source Route field, TCP/IP Filter Rule menu
8-5
IP Subnet Mask field, Edit IP Static Route menu
7-5
ISP Connection, troubleshooting 10-4
L
LAN Packet Which Triggered Last Call field,
System Maintenance Status menu 9-2
LEDs
description 2-6
troubleshooting 10-1
Length field, Generic Filter Rule menu 8-7
line port, connecting 2-7
log 9-3
Log and Trace menu 9-4
Log Facility field, Syslog and Accounting menu
9-5
Log field
Generic Filter Rule menu 8-8
TCP/IP Filter Rule menu 8-6
M
Macintosh, using to configure 1-4 , 2-9 , 3-1
manager interface
accessing through serial port 2-9
accessing through Telnet 2-9
commands 3-3
menus 3-5
troubleshooting 10-5
using for configuring 1-2 , 1-4 , 2-9 , 3-1
manager interface menus
Advanced Modem setup 3-8
Change Password 3-12
Default Dial-in Setup 6-1
Diagnostic 9-6
Dial-in User Setup 6-4
Edit Dial-in User 6-4
Edit IP Static Route 7-5
Ethernet Setup Menu 3-10
Filter Rules Summary 8-3 , 8-7
General Setup Menu 3-6
Generic Filter Rule 8-7
Internet Access Setup 4-2
Log and Trace 9-3
Main 3-4
Modem Setup 3-7
Remote Node Network Layer Options 7-3
Remote Node PPP Options 5-4
Remote Node Profile 5-1 , 7-2
Remote Node Setup 5-1
Static Route Setup 7-4
Syslog and Accounting 9-4
System Password 3-12
System Status 9-1
TCP/IP Filter Rule 8-4
manager password setup 3-12
Manual Call field, Diagnostic menu 9-6
Manual Call test 9-7
Mask field, Generic Filter Rule menu 8-7