Bay Technical Associates RM356 - Manual (Page 62)

Reference Guide for the Model RM356 Modem Router
5-4 Remote Node Configuration
Editing PPP Options
To edit PPP options:
1. Select Yes in the Edit PPP Options field of Submenu 11.1 - Remote Node Profile.
2. Press [Enter] to display Menu 11.2 Remote Node PPP Options.
3. Edit the options described in Table 5-2.
4. Press [Enter] at the Press ENTER to Confirm... prompt to confirm your selections, and
return to the previous menu.
Press [Esc] at any time to cancel your selections.
5. Continue to the end of Menu 11.1, and press [Enter] to save the selections you made in
Menu 11.2.
Table 5-2 lists and describes each field in Menu 11.2 - Remote Node PPP Options.
Table 5-2. Fields in Menu 11.2 - Remote Node PPP Options
Field Description
Encapsulation Select CCP (Compression Control Protocol) for the PPP or MP link. Two options
are available in this field:
• Standard PPP—Standard PPP options are used (default).
• CISCO PPP—Cisco Systems PPP options are used.
Compression Allows the negotiation of data compression with the remote node router.