Bay Technical Associates RM356 - Manual (Page 98)

Reference Guide for the Model RM356 Modem Router
9-8 System Maintenance
Figure 9-3 shows an example of a trace display for a failed call when using a TCP/IP protocol
connection.
Figure 9-3. Trace Display for a Failed TCP/IP Protocol Connection
Another useful diagnostic tool for TCP/IP testing is Ping Host, which causes a packet to be sent to
a specified host requesting an echo packet.
Enter 12 to select Ping Host. This diagnostic test pings a local or remote host. You are prompted
for the IP address of the host.
System Tools
Enter 21 to select Reboot System. Your system is rebooted, implementing any changes that may
have been recently added to your system.
Enter 22 to select Command Interpreter Mode. This option changes the Manager interface on your
router from the screen-based mode to a command line mode. The command line mode allows you
to configure, diagnose, and test your router using a specified set of commands. This mode is
capable of executing user-defined scripts sent from the terminal. For more information, refer to
“Command Interpreter Mode ,” on page 9-10 .
Start dialing for node<1>
### Hit any key to continue.###
Dialing chan<2> phone(last 9–digit):40101
Call CONNECT speed<64000> chan<2> prot<1>
LCP up
CHAP send response
###Login to remote failed. Check name/passwd.
Receive Terminate REQ
LCP down
Line Down chan<2>