Bay Technical Associates RM356 - Manual (Page 50)

Reference Guide for the Model RM356 Modem Router
3-8 Router Configuration
Advanced MODEM Setup Menu
Use the commands described in Table 3-3 to display Menu 2.1 - Advanced MODEM Setup. When
you finish entering the information for all the fields:
• Press [Enter] at the Press ENTER to Confirm prompt to save your selections.
or
• Press [Esc] to cancel.
When you press [Enter], the router uses the information that you enter to initialize the internal
modem.
Table 3-4 lists and describes the fields for Menu 2.1 - Advanced MODEM Setup.
When you have completed this menu, press [Enter] to return to Menu 2. Be sure to press [Enter]
again to exit Menu 2 in order to save changes made in both menus.
Table 3-4. Advanced MODEM Setup Menu Field Descriptions
Field Description Default
AT Command
Strings:
Dial Enter the AT Command string to make a modem connection. atdt
Init Enter the AT Command string to initialize the modem. at&fs0=0w2s95=1
Call Control:
Dial Timeout
(sec) The router will time out if it cannot set up an outgoing modem call
within the timeout value. 60
Retry Count How many times a busy or no-answer phone number is retried
before it is put on the blacklist (0 disables blacklisting). 0
Retry Interval
(sec) Elapsed time after a call fails before another call may be retried.
Applies before a phone number is blacklisted. 10
Call Back
Delay (sec) Elapsed time between dropping a callback request call and dialing
a callback call. 15