Bay Technical Associates RM356 - Manual (Page 71)

TCP/IP Configuration 7-1
Chapter 7
TCP/IP Configuration
This chapter describes how to configure your Model RM356 Modem Router for TCP/IP.
Depending on your particular applications, you must configure different menus. For instance,
Internet access is the most common application of TCP/IP. For this application, you should
configure Menu 4. Configurations for other applications are provided in the following sections.
LAN-to-LAN Application
An example of a typical LAN-to-LAN application is to use the router to call from a branch office
to the headquarters, as shown in
Figure 7-1 .
Figure 7-1. LAN-to-LAN Application
For the branch office, you must configure a remote node in order to dial out to the headquarters.
Additionally, you may also need to configure static routes if some services reside beyond the
immediate remote LAN.
8697EA
Branch office
Model RM356
router
Model RM356
router
Corporate
headquarters
PWR TEST COL 1 MODEM LAN 2 3 CD OH TD 4 RD
RM356 MODEL kbps 56 Remote Access Modem Router PWR TEST COL 1 MODEM LAN 2 3 CD OH TD 4 RD
RM356 MODEL kbps 56 Remote Access Modem Router