Philips Aspirateur-robot - Manual (Page 24)

24
4
Put the mesh filter back into the filter holder
with the black rubber seal pointing away from
the filter holder.
5
Reattach the filter holder to the dust
container (1).
6
Follow steps 7 to 9 in section ‘Emptying the
dust container’ to place the dust container
back into the robot (2) and to place the dust
container compartment cover back onto
the robot.
7.2 Cleaning the mesh filter
For the best results, we advise you to clean
the mesh filter every time you empty the
dust container.
1
Follow steps 1 to 3 in section ‘Emptying
the dust container’ to remove the dust
container compartment cover, take out
the dust container and remove the cleaning
tool from the inside of the dust container
compartment cover.
2
Pull at the release tab to detach the filter
holder from the dust container (1). Take the
mesh filter out of the filter holder (2).
3
Turn the mesh filter (1). Clean the mesh of
the filter with the brush side of the cleaning
tool (2).