Philips Aspirateur-robot - Manual (Page 21)

21
EN
g
LIS
h
6.5 BASE function
1
Press the BASE button on the remote control
to make the homeRun return to its base
station. The text ‘bASE’ appears on the display.
The robot moves to the base station and
docks itself (see chapter ‘Preparing for use’).
6.6 TURBO function
1
Press the TURBO button on the remote
control to make your homeRun clean more
thoroughly (1). The TURBO indication lights
up on the display (2).
2
Press the TURBO button again to return to
the robot’s normal level of thoroughness.
6.3.2 Checking, removing or changing a set
cleaning time or mode
1
Press the TIMER button on the remote
control. The set time and cleaning mode
become visible on the display.
2
To remove the set cleaning time and cleaning
mode, press the TIMER button again. The
set time and cleaning mode disappear from
the display. Then press the ENTER button to
confirm.
3
To change the cleaning time or mode, repeat
the steps in section ‘Setting the timer’.
D Note:
To leave the timer function without removing
the set cleaning time, press the ENTER button.
6.4 Manual driving
1
Press the direction selector on the remote
control to direct your homeRun to a
particular area.
• If you press the direction selector when the
robot is on but not cleaning, the robot moves
in the desired direction without cleaning.
• If you press the direction selector when the
robot is cleaning, the robot moves in the
desired direction while cleaning.
D Note:
The down arrow does not work because your
homeRun cannot move backwards.