BT PaperJet 40 - Manual (Page 26)

the number of rings before the fax answers a call: 0-5, and Manual
reception. If you select 0 you will not hear any rings before your fax
answers the call. If you set manual you will have to answer calls using the
handset.
ringer vol: Low, Med, High.
1. Press , for day settings or , for night settings.
2. Press . The display shows TOTAL RINGS.
3. Press or to display the total number of rings you want (between 0
and 7). If you select 0 your BT PaperJet 40 will answer without ringing
when you receive a call (unless you have manual reception set).
4. Press . The display shows FAX RINGS.
5. Press or to display the number of rings before the fax checks the
status of the incoming call. The number you set should be less than or
equal to the TOTAL RINGS.
6. Press . The display shows RINGER VOL.
7. Press or and LOW , MED and HIGH will be displayed and a sample heard.
8. Press when the required setting is displayed.
Silent operation
You can set your BT PaperJet 40 to not ring at all, e.g. at nighttime.
Select 0 for FAX RINGS and the BT PaperJet 40 will perform Silent
Reception by receiving faxes without ringing.
Select 0 for TOTAL RINGS and ensure FAX RINGS is not set to manual
reception and you will get total Silent Reception. The BT PaperJet 40 will
receive faxes but you will not be able to receive incoming telephone calls.
Faxing 26
BT PaperJet 40 UG – Issue 2 – Edition 2 – 18.03.04 – 6026
IMPORTANT
In silent mode only fax messages will be
received, not phone calls.