BT PaperJet 40 - Manual (Page 38)

38
BT PaperJet 40 UG – Issue 2 – Edition 2 – 18.03.04 – 6026
6. Take the new ink film roll, remove the rubber bands around it and slot the
large roll into the compartment at the back of the machine.
7. Place the small roll into the front ink film compartment, keeping the
blue cog on the right. Make sure the pin on the left has slotted into place.
8. Using the blue cog, rotate the small roll forward to tighten the film so
that it does not get creased.
Installing a new ink film