BT PaperJet 40 - Manual (Page 50)

BT PaperJet 40 UG – Issue 2 – Edition 2 – 18.03.04 – 6026
How many fax machines/telephones can you have?
All items of telephone equipment have a Ringer Equivalence Number
(REN), which is used to calculate the number of items which may be
connected to any other telephone line. Your BT PaperJet 40 has a REN
of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded, the
telephone may not ring.
With different fax/telephone types there is not guarantee of ringing, even
when the REN is less than 4.
Switchboard compatibility
This product is intended for use within the UK for connection to public
telephone network and compatible switchboards, which support tone
dialling and timed break recall. If in doubt please consult your service
provider.
Switchboard external line access code
You may need to enter an access code (e.g. 9) in order to get an outside
line. So that the switchboard has time to pick up an outside line, you may
also need to add a Pause after the access code.
Set access code
1. Press , then . Press or until the display shows
PABX: YES or NO . Press to confirm the setting you want.
2. Enter the access code you need to get an outside line (e.g. 9) and press
. Now press or to display CHECK: YES. Press .
Your BT PaperJet 40 automatically checks that the line connection
works. If it is, CHECK: OK is displayed briefly. If the check is not successful,
CHECK: NOT OK
is shown and you are prompted to repeat these steps
and enter the correct access code.
Technical information
50