BT PaperJet 40 - Manual (Page 44)

44
BT PaperJet 40 UG – Issue 2 – Edition 2 – 18.03.04 – 6026
Help
Display shows NO PHONE LINE.
Check your machine is installed correctly.
Display shows NO DIAL TONE.
Check your telephone line cable is plugged into the socket marked LINE
on your BT PaperJet 40.
Display continually shows BUSY or faxes you send are constantly
interrupted.
Try sending the fax using the button so you can hear the progress of
your call.
Press and dial the number manually. If the recipient is using an
answering machine, wait until you hear the tone after the recorded
message, then press
.
When you answer the phone you hear the fax tones or silence.
Your machine is receiving a fax. Press – or if answering on an
attached phone, press – then replace the handset.
Display shows EXTERNAL PHONE and the light flashes.
Indicates a separate phone connected to the BT PaperJet 40 line cord
socket is being used.
Cannot fix a recurring problem.
Try unplugging your machine from the mains power, wait at least
10 seconds, then switch the power back on again. If the fault still recurs,
call the Helpline.
BT PaperJet Helpline
0870 241 6538
Call the dedicated BT PaperJet Helpline:
if you are having difficulties using your
BT PaperJet 40.
The Helpline will be open from
8.30am to 5.30pm Monday to Friday,
except for UK public holidays, and
9.00am to 2.00pm on Saturdays.