Liebherr GGU 1550 Premium User Manual
Page 10
18
19
Several models can be installed beneath
a worktop. In this case, a ventilation grill
with cross-section of at least 200 cm
2
is
required in the worktop for ventilation at
the rear of the appliance. If no ventilation
grill is going to be fitted in the work-
top, the recess height must be at least
860 mm to ensure sufficient heat dissi-
pation to the front. Under-worktop models
offer a space-saving solution, which is
particularly suitable for use in restricted
spaces.
The appliances are factory-fitted with door hinges on the right. Being able to change
the hinge side allows the appliance to be positioned even more optimally and tailored
to individual requirements.
Under-worktop models
Interchangeable door hinges
The 304-grades stainless steel interior is optimally designed to accommodate baking
trays. The adjustable, L-shaped tray slides can be used to hold baking trays of 600
x 400 mm and 600 x 800 mm, depending on the appliance size. A special air duct
ensures that cold air is not directly aimed at delicate products.
The stainless steel moulded inner liners
are robust, versatile, and very hygienic.
The ribs can be used to hold Gastronorm
2/1 and 1/1 containers as well as wire
shelves.
Bakery shelves
Gastronorm 2/1 models
Catering & baker
y