Attaching the antenna, Attaching the snap-on antenna, Hold the antenna so the connector and guide pin – Aironet Lan Adapter User Manual
Page 37: Slide the leads on the antenna into the connect, Attaching a remote antenna, Line up the antenna cable leads with the connec, Slide the cable leads into the connectors until, Attaching the antenna -5
Installing the Hardware
2-5
Attaching the Antenna
CAUTION:The Snap-On antenna should never be placed
in contact with metal surfaces while in use.
Attaching the Snap-On Antenna
NOTE:
Wireless LAN Adapter Card comes with the
antenna attached. If you need to change the antenna, the
Adapter should be removed from the PC Card slot before
removing or attaching an antenna.
1.
Hold the antenna so the connector and guide pin
leads line up with the connector and slots on the
PC Card. The Aironet logo on the PC Card and on
the Snap-On antenna should both be facing up.
2.
Slide the leads on the antenna into the connectors
until they snap into place.
Attaching a Remote Antenna
1.
Line up the antenna cable leads with the connec-
tors on the PC Card.
2.
Slide the cable leads into the connectors until they
snap into place.