Odi driver installation, Power on your computer, Copy the \odi\awco45c.com driver from the airon – Aironet Lan Adapter User Manual
Page 53: Copy the \odi\net.cfg file from the aironet dri, Modify the pc card system parameters by editing, Run the batch files created by the netware inst, Odi driver installation -11
Installing the Software
3-13
ODI Driver Installation
The PC Card can be installed in an ODI compliant DOS
environment such as Novell NetWare.
Table 3.4 - Minimum NET.CFG Driver Settings
1.
Power on your computer.
2.
Copy the \ODI\AWCO45C.COM driver from the Aironet
Driver diskette to the directory containing the network
files.
3.
Copy the \ODI\NET.CFG file from the Aironet Driver dis-
kette or merge the Aironet supplied NET.CFG file into
your existing NET.CFG file in the network directory.
4.
Modify the PC Card system parameters by editing the
NET.CFG file. For a list of parameters which can be
modified, see Table 3.4.
5.
Run the batch files created by the NetWare installation
disks or manually load the driver from AUTOEXEC.BAT
or the command line. This can be done by running LSL,
followed by AWCO45C, IPXODI, and NETX or VLM.
Infrastructure Mode
Link Driver AWCO45C
If INFRASTRUCTURE is omitted the default will be “ON”
SSID = “your_SSID_here”
CHANNEL = <channel> (only required in ad hoc mode)