Aironet Lan Adapter - Manual (Page 88)

Commands Menu
B-2
Load New Firmware
See Section 4 – Utilities for more information on loading
and upgrading firmware versions.
Edit Properties
WinDGS allows you to change the configuration parameters
of your currently installed Aironet 4000 Series Wireless LAN
Adapter. Depending on the preferences you have set,
WinDGS can save the current properties to the registry.
See Save Properties Options for more information.
Statistics
The Statistics screen shows the current statistics from the
PC Card. Statistics are updated at the rate specified by the
Screen Update Timer. Clear the current statistics by clicking
on Reset. Exit the Statistics screen by clicking on OK, or by
clicking on the X in the upper right hand corner of the dialog
box.
Status
The Status screen shows the current status from the PC
Card. Status is updated at the rate specified by the Screen
Update Timer. Exit the Status screen by clicking on OK, or
by clicking on the X in the upper right hand corner of the
dialog box.