Windows 95 or windows 98 ndis3 installation, Power on your computer and boot windows, Insert the adapter into one of the pc card slot – Aironet Lan Adapter User Manual
Page 44: Windows will display the new hardware found 3, Select the driver from disk provided by hardwar, Insert the driver disk provided with the adapte, Type a:\ndis3 at the prompt and press enter, Select the appropriate lan adapter and press en, Select the appropriate infrastructure mode and, Optionally, select the channel and bitrate para
Installing the Software
3-4
Windows 95 or Windows 98 NDIS3
Installation
To complete the installation of the PC Card under Windows
95 or Windows 98, make sure that the PC Card driver is
installed and PC Card 32-bit support is enabled.
NOTE:
To find out more about PC Card and PC Card 32-
bit support, follow the instructions found in the Windows
95 Help menu section titled Enabling 32-bit PC card
support (under PCMCIA).
1.
Power on your computer and boot Windows.
2.
Insert the adapter into one of the PC Card slots.
3.
Windows will display the New Hardware Found
dialog box.
4.
Select the Driver from disk provided by hardware
manufacturer option and select OK.
5.
Insert the driver disk provided with the adapter into the
appropriate drive.
6.
Type A:\NDIS3 at the prompt and press Enter.
7.
Select the appropriate LAN Adapter and press Enter.
8.
Select the appropriate Infrastructure Mode and enter
the SSID of the wireless network.
9.
Optionally, select the Channel and Bitrate parameters.
10. Press Enter.
11. Windows will prompt for the system disks. Enter the
correct network path.
12. Restart Windows after the files are copied. The system
will reboot and the installation will be complete.