Windows for workgroups ndis2 installation, Power on your computer and start windows for 1, Go to the network program group and click on ne – Aironet Lan Adapter User Manual
Page 48: Under network setup, choose networks, Under networks choose install microsoft windows, Under network setup, choose drivers, Under network drivers, choose add adapters, If the drivers were already copied to the hard, Under add adapter, choose the appropriate airon, Place the driver disk in drive a
Installing the Software
3-8
Windows for Workgroups NDIS2
Installation
1.
Power on your computer and start Windows for
Workgroups.
2.
Go to the Network program group and click on Network
Set-Up.
3.
Under Network Setup, choose Networks.....
4.
Under Networks choose Install Microsoft Windows
Network. Select OK.
5.
Under Network Setup, choose Drivers....
6.
Under Network Drivers, choose Add Adapters.
7.
If the drivers were already copied to the hard disk, they
will be displayed in the list.
8.
Under Add Adapter, choose the appropriate Aironet
Adapter. If it is not on the menu list, choose Unlisted or
Updated Network Driver. The Install Driver pop up
window will ask you for the Aironet driver disk.
9.
Place the driver disk in drive A.
10. Type A:\NDIS2\ at the prompt and press Enter.
11. Choose the correct Aironet Adapter and click OK.
12. If the chosen adapter is displayed in the Network
Drivers, click on Setup.
13. Select the appropriate parameters, such as Infrastruc-
ture Mode, SSID, Channel, and Bitrate.
14. Exit Windows for Workgroups.
15. To modify the PC Card system parameters, edit the
PROTOCOL.INI file in the Windows directory.
16. Reboot your computer.