Windows nt ndis3 installation, Shutdown the windows nt workstation, Insert the wireless lan adapter into one of the – Aironet Lan Adapter User Manual
Page 46: Power up the windows nt workstation, From the control panel, select the network icon, Select adapters, Select add, Select have disk, Insert the driver disk provided with the adapte, Type a:\ndis3 at the prompt and press enter
Installing the Software
3-6
Windows NT NDIS3 Installation
To complete the installation of the PC Card using
Windows NT, verify PCMCIA card and socket services are
enabled using Devices in the Control Panel.
1. Shutdown the Windows NT workstation.
2. Insert the Wireless LAN Adapter into one of the
PC Card slots.
3. Power up the Windows NT workstation.
4. From the control panel, select the Network icon.
8. Insert the driver disk provided with the adapter into the
appropriate drive.
9. Type A:\NDIS3 at the prompt and press Enter.
10. Select OK when the dialog box shows Aironet PC
Card LAN Adapter.
11. Select the appropriate parameters, such as Infrastruc-
ture Mode, SSID, Channel, and Bitrate.
12. Verify that the Interrupt and IO Base Address do not
conflict with other devices’ resources.
For Windows NT 4.xxx
For Windows NT 3.51
5.
Select Adapters.
Select Add Adapters.
6.
Select Add.
Select <Other> Require
disk from manufacturer
from the list of adapters.
7.
Select Have Disk.
Select Continue.