Aironet Lan Adapter - Manual (Page 39)

Installing the Hardware
2-7
Installing the Wireless LAN Adapter
Before you begin, examine the PC Card. One end is a dual
row 68-pin PC Card connector. This side will be inserted into
the PC Card slot with the Aironet logo on the PC Card and the
Snap-On antenna facing up. The card is keyed so it can be
inserted only one way into the PC Card slot.
CAUTION: The following procedures and physical
connections apply generally to normal and conventional PC
Card slots. In the cases of custom or non-conventional
equipment, be alert to possible differences in PC Card slot
configurations.
The PC Card can be connected to a PC Card Type II slot. This
includes slots that support both Type II and Type III cards.
CAUTION: Do not force the PC Card into the PC Card slot.
Forcing it will damage both the PC Card and the slot. If the
PC Card does not go in easily, remove the card and re-
insert.
Connecting the PC Card
1. Hold the PC Card so the Aironet logo is facing up.
2. Slide the PC Card into the slot until its connector is
firmly seated and the slot’s eject button pops out.
Removing the PC Card
1. Press the PC Card slot’s eject button until the PC Card
is free.
2. Grasp the sides of the PC Card and pull it out of the
slot.