Aironet Lan Adapter - Manual (Page 49)

Installing the Software
3-9
DOS NDIS2 Installation
The Aironet Wireless LAN Adapter can be installed in a
NetBIOS compliant DOS environment such as MicroSoft
LAN Manager or PC LAN.
The installation of this driver includes creating or editing a
configuration file (PROTOCOL.INI).
It is required that this file contains the following lines:
Table 3.2 - Minimum PROTOCOL.INI Driver Settings
Additional variables defined in the following section may
also be used.
1. Power on your computer.
2. Copy the \NDIS2\AWC2N45C.DOS from the Aironet
Device Driver diskette to the directory containing the
network files.
3. Copy the PROTOCOL.INI file to the network directory
or merge statements from the Aironet supplied file into
your existing PROTOCOL.INI file.
Infrastructure Mode Ad Hoc Mode
[AW2N45C] [AW2N45C]
DRIVERNAME=AWC2N45C$ DRIVERNAME=AWC2N45C$
If INFRASTRUCTURE is omitted
the default will be “ON” INFRASTRUCTURE = “NO”
SSID = “your_SSID_here” SSID = “your_SSID_here”
CHANNEL = <channel>