Bay Technical Associates V79 PDI-1 - Manual (Page 17)

13
4.3.4 REPORT ALL BUFFERED EVENTS COMMAND
The Report All Buffered Events (RA) command instructs the PDI to report all
event samples currently stored in the buffer of the selected channel(s). The
Report All Buffered Events command has the following format:
RAn<cr>
where c = Channel# (1 to 16 or 0 for all).
4.3.5 REPORT EVENT COUNTER COMMAND
The Report Event Counter (RC) command instructs the PDI to report how many
times an event has occurred for one or more channels since the last time a counter
reset command was issued. This command does not reset the event counter.
The Report Event Counter command has the following format:
RCc<cr>
where c = Channel# (1 to 16 or 0 for all).
4.3.6 REPORT EVENT DURATION COMMAND
The Report Event Duration (RD) command instructs the PDI to report how long
the most recent recorded event for the selected channel(s) lasted. Event duration
is discussed more in Section 4.4. The Report Event Duration command has the
following format:
RDc<cr>
where c = Channel# (1 to 16 or 0 for all).