BNC 7000 Series User Manual - Manual (Page 39)

39
3.6 AM Noise Measurement (SERIES 7000)
This function measures the amplitude noise of the signal in the specified offset frequency range.
Amplitude measurement does not require any reference sources and any few parameters must be set
such as offset range and number of correlations.
The amplitude noise measurement tab is shown in Figure 15.
Figure 15 Amplitude noise tab
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com