Bosch 500 - Manual (Page 14)

14 en | Mounting MIC Series 500 Camera
F.01U.173.601 | 2.0 | 2010.11 User’s Manual Bosch Security Systems, Inc.
4 Mounting
Installation should be made by qualified service personnel and conform to the National
Electrical Code and applicable local codes.
The MIC 500 Series Camera range has been designed for easy installation on a variety of
common fittings. The most common type of mount used is a dedicated CCTV camera pole
where the camera is bolted directly to the top of the pole using industry standard 4 in. (101.6
mm) fittings. This type of camera pole provides a robust mounting platform that minimizes
camera motion and typically has a large base cabinet for mounting ancillary equipment such
as power supplies.
The camera can also be mounted on lamp post columns using the Pole Mount Bracket (MIC-
PMB); however, users should be aware that lamp posts can often be subject to movement and
are not suitable platforms in all conditions or for all applications.
The following mounting brackets are available:
For mounting directly to a building, brackets are available for all typical building installations
such as upright (90°), canted (45°), or inverted.
Figure 4.1 Typical pole mount arrangement (MIC-PMB with MIC-SCA and MIC-WMB)
Figure 4.2 Typical wall mounting arrangement (MIC-SPA, MIC-SCA and MIC-WMB)
Part Description
MIC-SPA Wall Spreader Plate
MIC-PMB Pole Mount Bracket
MIC-CMB Corner Mount Bracket
MIC-WMB Wall Mount Bracket
MIC-SCA Shallow Conduit Adaptor
MIC-DCA Deep Conduit Adaptor