Bosch 500 User Manual

Page 37

Advertising
background image

MIC Series 500 Camera

Navigating the Menus | en

37

Bosch Security Systems, Inc.

User’s Manual

F.01U.173.601 | 2.0 | 2010.11

preset number to be saved. This is similar for the alarms; however, the number is only visible

if Multi Alarm is turned on, otherwise the Sony Set table is automatically mapped to the single

alarm input (tamper switch).

Mapping to nothing saves the table information but it is not automatically called up at any

time by the camera. For Nothing, and Normal mapping, the number option becomes

unavailable. This submenu can only be exited through the Save and Exit or Exit Without Saving

option.

The Setup Commands option loads in the table selected, showing 4 commands per page, each

displaying the selected command type and its associated value. These are set as with any

other options in the menu by selecting the appropriate line, Right, then using up and down to

move through the list.

Changing the command type will change the setting for that type to the default value so the

command type should be selected first and then the options second.

The list of available controls and values is below.

Setting

Options

Mapped To

Nothing / Normal / Preset with PTZ/ Preset without PTZ/ Alarm

Number

N/A / Preset 1-64 / Multi Alarm 1-12

No. of Commands

1-10

Setting

Values Available

Camera Zoom

0-28672

Digital Zoom

ON / OFF

Set Focus

4096-49152

Focus Mode

Auto/Manual

Focus Control

One Push Trigger / Force Infinity

AF Sensitivity

High / Low

Focus Near Limit

4096-49152

White Balance

Auto / Indoor / Outdoor / One Push / Auto Tracing /Manual / One

Push Trigger

Red Gain

Reset / Plus 1 / Minus 1

Red Gain Set

0-255

Blue Gain

Reset / Plus 1 / Minus 1

Blue Gain Set

0-255

Exposure

Auto / Manual / Shutter Priority / Iris Priority / Gain Priority /

Bright / Shutter / Auto / Iris Auto / Gain Auto

Slow Shutter

Auto / Manual

Shutter

Reset / Plus 1 / Minus 1

Shutter Set

0-19

Iris

Reset / Plus 1 / Minus 1

Iris Set

0-19

Gain

Reset/Plus 1/Minus 1

Gain Set

0-7

Brightness

Reset / Plus 1 / Minus 1

Brightness Set

0-19

Advertising