Bosch 500 - Manual (Page 36)

36 en | Navigating the Menus MIC Series 500 Camera
F.01U.173.601 | 2.0 | 2010.11 User’s Manual Bosch Security Systems, Inc.
5.9.1 Mapping to a MIC 500 Series Camera Function
If utilizing the mapping functionality of the Sony Set options, there should be a Sony Set table
(1 as default) mapped to normal which changes all of the options set in the other tables back
to a default condition for the camera.
For example, for an ANPR setup on preset 10, table 2 should resemble something as follows:
To ensure that the camera returns to a normal state once leaving this preset, one of the Sony
Set tables must be mapped to Normal and have the following in it:
The normal setup is also loaded on boot. Mapping to an alarm works in exactly the same way
as the preset mapping, being called when the respective alarm input is triggered. If Multi
Alarms is not switched on, then the table can be mapped to the tamper switch input.
The Sony Set sub menu is called in the same way as Setup Tour in that a Sony Set table
number, 1 to 10, must be selected before it is opened.
There are 3 options on the main page which set up the overall information of the Sony Set
table, with the individual commands being specified on the Setup Command List sub menu. If
Preset is selected on the Mapped To option, the number option becomes available, allowing a
SONY SET 1 : WHITE BALANCE
CAPTIONS MAPPED TO PRESET : MANUAL
PRIVACY NUMBER 5 2 : SET RED GAIN
POT TEST : 250
MIC INFORMATION NO. COMMANDS 4 3 : EXPOSURE
ENTER PASSWORD SETUP COMMAND LIST : SHUTTER PRIORITY
HELP 4 : SET SHUTTER
EXIT SAVE SONYSET : 10
EXIT WITHOUT SAVING
Menu Item Description Options
MAPPED TO This is the function to which the current Sony Set table is
mapped. If Sony Set 1 is MAPPED TO preset 23, and if you
perform a go to preset 23 action, the camera will also call up
Sony Set 1 from memory. ALARM maps to a given alarm input,
PRESET W.OUT PTZ means that the camera calls the Sony Set
table but will not moved to the stored position associated with
that preset. NORMAL is the preset that is called whenever the
user moves away from a different mapping; if a Preset mapped
SonySet is called, and then you move away from this position,
the NORMAL Sony Set is called.
Nothing / Normal /
Preset with PTZ /
Preset without PTZ /
Alarm
NUMBER This is the value associated with the MAPPED TO field. Only valid
for some functions, PRESET WITH PTZ, PRESET W.OUT PTZ and
ALARM (multi alarm only).
N/A / Preset 1-64 /
Multi Alarm 1-12
NO. COMMANDS The number of commands available in the currently selected
Sony Set table.
1-10
SETUP COMMAND LIST Sub page for defining each command and associated value.
Function Value
Exposure Shutter Priority
Shutter Set 14
Function Value
Exposure Auto