Bosch 500 - Manual (Page 26)

26 en | Navigating the Menus MIC Series 500 Camera
F.01U.173.601 | 2.0 | 2010.11 User’s Manual Bosch Security Systems, Inc.
5.1.1 Config Mode
The Config Mode settings are available through the on-screen menu and offers the user a
quick way to set up the unit for various configurations (see Table 5.2 for the available options
and settings when the Config Mode is set).
Table 5.2 Config Mode Options and Settings when Set
5.2 Activate Feature Menu
The Activate Feature menu can be used to initiate a Preset or Pattern tour once the menu is
closed, or to directly call up an individual SonySet preset.
5.3 Preset Tour Menu
To program a Tour, access the Preset Tour menu; specify the tour number from 1 to 6 then
press right to enter the Tour Settings page. Once inside the menu, there is one setting
available “No of Tour Points,” two (2) further sub menus “Tour Point Settings” and “Create /
Modify Tour” and then a save tour option.
Image Flip Pan Reverse Tilt Reverse Privacy
Upright OFF OFF OFF Upright
Canted OFF OFF OFF Canted
Inverted OFF ON OFF Inverted
MAIN MENU 1/2 ..ACTIVATE FEATURE..
MIC SETUPS PRESET TOUR NO 1
ACTIVATE FEATURE
PRESET TOUR
START TOUR
PATTERN TOUR
PRESETS
PATTERN TOUR NO. 1
COMMUNICATIONS START TOUR
ADVANCED SETUPS
ALARMS
SONYSET NO 1
RUN SONYSET
Menu Item Description
PRESET TOUR To start a preset or pattern tour, select the number under the appropriate option, and then
press right on the “Start Tour” immediately under the feature required. For example, to start
Preset Tour 3, change “Preset Tour No.” to 3, then press “Start Tour” directly underneath. The
tour begins approximately 1 second after the menu has been closed.
PATTERN TOUR
SONYSET Select the required Sony Set preset using “Sonyset No.” and press “Run SonySet” directly
below. The preset table is activated immediately.
MAIN MENU 1/2 ..PRESET TOUR 1.. .. TOUR SETTINGS ..
MIC SETUPS
ACTIVATE FEATURE
NUMBER OF TOUR DWELL SETTINGS
PRESET TOUR POINTS 5 DEFAULT 10
PATTERN TOUR MAX RANDOM 64
PRESETS TOUR POINT SETTINGS MIN RANDOM
COMMUNICATIONS CREATE/MODIFY TOUR
ADVANCED SETUPS PRESET SETTINGS
ALARMS SAVE TOUR MAX RANDOM 10
MIN RANDOM 1