Bosch 500 User Manual
Page 21
MIC Series 500 Camera
Mounting | en
21
Bosch Security Systems, Inc.
User’s Manual
F.01U.173.601 | 2.0 | 2010.11
5
Video Return
Video Signal Ground
Coax Screen
6
Video Output
Video Output to Control Room
Coax Core
7
Full Duplex Tx B
Telemetry I/O to RS-422/485
Violet
8
Full Duplex Tx A
Telemetry I/O to RS-422/485
Blue
9
0v Ground
Shield
10
Full Duplex Rx A
Half Duplex Tx/Rx A
Telemetry I/O to RS-422/485
Yellow
11
Full Duplex Rx B
Half Duplex Tx/Rx B
Telemetry I/O to RS-422/485
White
12
Power Input 2
Low Voltage Power Input
Green
13
Power Input 1
Low Voltage Power Input
Red
Camera Cable
Connector Pin
Signal Name
Description
Cable Wire Color
NOTICE!
Use of the shielded composite cable for distances in excess of 25 m between the camera and
the MIC power supply is not recommended.
WARNING!
Ensure that all power is disconnected before opening or working on the MIC power supply.
Installation should be made by qualified service personnel and conform to the National
Electrical Code and applicable local codes. Ensure a strong safety chain is used to secure the
MIC 500 Series Camera to prevent any danger of dropping the product during installation.