Baby Trend Flex-Loc Infnat Car Seat CSO190AD809 - Manual (Page 31)

31
5.0
FEATURES
Adjuster Plate. From the front of the seat,
pull the Harness Straps through the shoulder
area slots and seat pad.
6. Using the included Belt Threading Tool,
insert the Harness Straps through the Slots
selected in step 2 above, in the seat pad and
the seat shell, respectively. (Fig. 31-1)
7. From the rear of the Safety Seat, pull the
Harness Straps through the Slots until you
have enough strap to reach the Belt
Adjuster Plate.
8. Reassemble the Harness Straps to the Belt
Adjuster Plate. Do the left Harness Strap
first, followed by the right Harness Strap.
Check that Harness Straps are completely
within the Belt Adjuster Plate loop (Fig. 31-2).
You have two adjustment positions on the
harness. Use Position A for a smaller child,
and Position B for a larger child. If using
Position A, loop B must be on top of the Belt
Adjuster Plate. (Fig. 31-3)
9. Inspect the Harness Straps from the front
and rear to ensure that they are not twisted.
Twisted straps can prevent proper tightening
of the Harness and thus may not adequately
restrain your child in a sharp turn, sudden
stop or crash.
A A
B
Fig. 31-1
Fig. 31-2
Fig. 31-3
Belt Threading Tool
A
A
B
B