Baby Trend Flex-Loc Infnat Car Seat CSO190AD809 - Manual (Page 41)

41
7.0
INSTALLATION
6. To tighten a lap belt only:
• An automatically retracted lap seat belt
is tightened by feeding belt back into its
retractor while pushing down hard on the
Safety Seat or Base. Make sure that the
retractor locks the lap belt into place and
that the belt remains very tight. (Fig. 41-1)
• A manually adjusted lap seat belt is
tightened by pulling on the free end of
the seat belt while pushing down hard
on the Safety Seat or Base. If you
experience difficulty tightening the seat
belt, unbuckle the seat belt, tighten the
seat belt a small amount and re-buckle
the seat belt. Repeat this procedure
until the seat belt is very tight around the
Safety Seat or base. Check that the seat
belt remains very tight around the Safety
Seat or base. (Fig. 41-2)
7. To tighten a combination lap/shoulder seat belt:
• A lap/shoulder combination belt with a locking buckle is tightened
by pulling upward on the shoulder portion of the seat belt while
pushing down hard on the Safety Seat or Base. If you experience
difficulty tightening the seat belt, unbuckle the seat belt, tighten
the seat belt a small amount and re-buckle the seat belt. Repeat
this procedure until the seat belt is very tight around the Safety
Seat. (Fig. 42-1)
Fig. 41-2
Fig. 41-1