Baby Trend Flex-Loc Infnat Car Seat CSO190AD809 - Manual (Page 40)

through the Safety Seat without the Base.
4. Buckle the seat belt being careful that the
seat belt is not twisted and is securely
latched into the appropriate buckle, and
not the adjacent buckle. (Fig. 40-2)
5. Proper installation of the Safety Seat
or Base requires that the seat belt be
very tight. To tighten the seat belt, push
down hard with your knee or hand on the
Safety Seat or Base while pulling and
tightening the seat belt. Check that there
is no slack in the seat belt on either side
of the Safety Seat or Base, or anywhere
along the path of the belt, and that the
seat belt is tight from end to end.
(Fig. 40-3 and 40-4)
7.0
INSTALLATION
40
Fig. 40-2 Fig. 40-3 Fig. 40-4
Fig. 40-1
Lap/Shoulder Belt
Lap Belt only