Baby Trend Flex-Loc Infnat Car Seat CSO190AD809 - Manual (Page 36)

6.0
INFANT RESTRAINT
36
6.2 For the 5-Point Harness
• Type A: Put the two buckle tongues together,
overlaying the left buckle tongue onto the
right buckle tongue, and insert the two joined
buckle tongues into the harness buckle on
the crotch strap (Fig. 36-1). Type B: Insert
each buckle tongue into the harness buckle
(Fig. 36-2).
Make sure that you hear the tongues click
into the buckle and check that both are firmly
latched by pulling upward on the straps. If
the harness straps are not securely buckled,
the safety seat will NOT provide protection
for your child. DO NOT use the safety seat,
even as a carrier, if the harness does not
securely buckle. Please call Baby Trend at
1-800-328-7363 for assistance.
• From the front of the Safety Seat, pull outward on the Harness
Adjuster Strap to tighten the Harness Straps. Make sure that
both Harness Straps are flat and tight on your child’s shoulders.
The harness is properly tightened if you are not able to insert
more than one finger between the harness strap and your child’s
shoulder.
• Fasten the Harness Chest Clips together. Position the Harness
Chest Clip, by sliding the Clip either up or down on the
Harness Straps, so that it is level with the child’s armpits.
Fig. 36-1
Fig. 36-2