Lukas PC 650 - Manual (Page 39)

39
Fault Check Cause Solution
It is frequently not
possible to couple
hose assemblies Hydraulic fl uid not
adapted to the
application situation Hydraulic fl uid must be
replaced (see chapter
“Recommended
Hydraulic fl uids”)
Coupling defective Coupling must be
replaced immediately
Leak from the
couplings Coupling defective Coupling must be
replaced immediately
Fluid leak on the
hoses or the fi ttings Leak, possible damage Replace hoses
Damages on the
surface of the hoses Mechanical damage
or contact with
aggressive agents Replace hoses
Contact an authorised LUKAS dealer or the LUKAS Customer Service Department directly
if the malfunctions cannot be rectifi ed.
The address for the LUKAS Customer Service department is:
LUKAS
Hydraulik GmbH
A unit of the IDEX Corporation
Weinstrasse 39, D-91058 Erlangen, Germany
Tel.: (+49) 09131 / 698 - 348
Fax.: (+49) 09131 / 698 - 353