Lukas PC 650 - Manual (Page 8)

8
Keep combustion engines and
their fuels away from sources
of ignition since otherwise there
will be a danger of explosion. All damaged electrical
components e.g. scorched
cables, etc. must be replaced
immediately!
In order to prevent the danger
of fi re, you should ensure
adequate ventilation when
operating combustion engines
and you must keep a safety
distance of at least 1m (39.4
in.) to walls and other screens. Damage to electrical
components must only
be repaired by a qualifi ed
electrician in compliance with
all applicable national and
international safety guidelines
and regulations.
Make sure that the combustion
engines are always standing on
as fl at and horizontal a surface
as possible to prevent fuel from
leaking out. When setting up the units, you
must make sure that they are
not impaired by the infl uences
of extreme temperatures.
The equipment is fi lled with
hydraulic fl uid. This hydraulic
fl uid can be detrimental to
health if it is swallowed or its
vapour is inhaled. Direct contact
with the skin must be avoided
for the same reason. Also,
when handling hydraulic fl uid,
note that it can negatively affect
biological systems. When working with or storing
the equipment, ensure that the
function and the safety of the
equipment are not impaired
by the effects of severe
external temperatures or that
the equipment is damaged in
any way. Please note that the
equipment can also heat up
over a long period of use.
Make sure there is adequate
lighting while working. Before transporting the
equipment, always ensure that
the accessories are positioned
in such a way that they cannot
cause an accident.
Always keep these operating
instructions easily accessible at
the place of operation. Ensure the proper disposal of
all removed parts, leftover oil,
hydraulic fl uid and packaging
materials.
If you spill any fuel when using
combustion engines, you must
remove the spilled fuel complete-
ly before starting the engine. Refuelling whilst the engine is
running is strictly prohibited!