Lukas PC 650 - Manual (Page 7)

7
In the event of malfunctions,
immediately deactivate the
device and secure it. Repair the
fault immediately. Do not carry out any changes
(additions or conversions) to the
equipment without obtaining the
approval of LUKAS beforehand.
Observe all safety and danger
information on the device and in
the operating instructions. All safety and danger
information on the device must
always be complete and in a
legible condition.
Please ensure that all safety
covers are present on the
equipment and that they are in
proper and adequate condition. Any mode of operation which
compromises the safety and/
or stability of the device is
forbidden!
Safety devices must never be
disabled! The maximum operating
pressure set on the equipment
must not be changed!
Make sure before switching
on/starting up the device and
during its operation, that this will
put no one in danger. Observe all intervals for
recurring tests and/or
inspections that are prescribed
or stated in the operating
instructions.
When working close to live
components and cables,
suitable measures must be
taken to avoid current transfers
or high-voltage transfers to the
equipment. Only genuine LUKAS
accessories and spare parts are
to be used for repairs.
When working with this
equipment or when transporting
it, ensure that you do not get
caught up in the hose or cable
loops and trip.
The build-up of static charge
and therefore possible sparking
must be avoided when handling
the device. Do not touch the engine and
exhaust system when running
with combustion engine pumps
because of the danger of
burning.
Motorised pumps must not be
operated in areas at risk of
explosion! Combustion engines must not
be operated in enclosed spaces
because of the danger of
poisoning and / or smothering.