JLG 4017 Platform Operator Manual - Manual (Page 10)

Section 1 - General Safety Practices
1-2 31200029
1.3 OPERATION SAFETY
Electrical Hazards
• This machine is not insulated and does not provide protection from contact or
proximity to electrical current.
• Maintain safe distance from electrical lines, apparatus or any energized (exposed
or insulated) parts according to the Minimum Safe Approach Distance (MSAD).
• Allow for machine movement and electrical line swaying.
Voltage Range
(Phase to Phase)
MINIMUM SAFE APPROACH
DISTANCE (MSAD)
0 to 300 V AVOID CONTACT
Over 300 V to 50 KV 3 m (10 ft)
Over 50 KV to 200 KV 5 m (15 ft)
Over 200 KV to 350 KV 6 m (20 ft)
Over 350 KV to 500 KV 8 m (25 ft)
Over 500 KV to 750 KV 11 m (35 ft)
Over 750 KV to 1000 KV 14 m (45 ft)
Note: This requirement shall apply except where employer, local or
governmental regulations are more stringent.
OZ1760