JLG 4017 Platform Operator Manual - Manual (Page 37)

Section 3 - Operation
3-5 31200029
3.4 LOADING AND SECURING FOR TRANSPORT
1. To move/load the platform when detached from telehandler, use fork slots
located under the platform.
2. Secure platform to deck with strap as shown in the figure.
Note: The user assumes all responsibility for choosing the proper method of
transportation and tie-down devices, making sure the equipment used is capable of
supporting the weight of the platform being transported and that all manufacturer’s
instructions and warnings, regulations and safety rules of their employer, and all
local and federal/provincial laws are followed.
OZ1861
1
2