JLG 4017 Platform Operator Manual - Manual (Page 27)

Section 2 - Pre-Operation and Controls
2-9 31200029
Platform Functions
• Platform tilt is enabled by button (2) and controlled by the rocker switch (3). Press
and hold the button; push the rocker switch up to tilt platform back (up); push the
rocker switch down to tilt platform forward (down).
• Attachment rotate is enabled by button (4). Press and hold the button; move the
joystick left to rotate platform left; move the joystick right to rotate the platform
right.
WARNING
CRUSH HAZARD. Only use platform tilt function for slight leveling of the platform.
Incorrect use could cause the load/occupants to shift or fall. Failure to comply
could result in death or serious injury.