Platform capacity - fixed platform, Platform extension capacity, Machine weight – JLG 400CRT ANSI Service Manual User Manual

Page 10: Machine height (fully extended), Machine platform height (platform lowered), Machine length, Machine width, 4 torque requirements, 5 lubrication, Lubrication specifications

Advertising
background image

SECTION 1 - SPECIFICATIONS

1-2

– JLG Lift –

3121111

Platform Capacity - Fixed Platform

330CRT - 1,000 lb. (455 kg)

400 CRT - 800 lb. (365 kg)

Platform Extension Capacity

All Models - 250 lb (120 kg)

Machine Weight

330CRT - Approx. 9,320 lb. (4,228 kg)

440CRT - Approx. 10,070 lb. (4,568 kg)

Machine Height (Fully Extended)

330 CRT - 33 ft. (10 m)

400 CRT - 40 ft. (12 m)

Machine Platform Height (Platform Lowered)

330 CRT - 66.5 in. (1.7 m)

400 CRT - 68.25 in. (1.7 m)

Machine Length

10 ft. 2 in. (3 m)

Machine Width

69 in. (1.8 m)

1.4

TORQUE REQUIREMENTS

All wheel lugs must be torqued at 105 ft lb (142 ft lb) every
50 hours.

1.5

LUBRICATION

NOTE: Hydraulic oils must have anti-wear qualities at least

to API Service Classification GL-3, and sufficient
chemical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobilfluid 424
hydraulic oil, which has an SAE viscosity index
of152.

NOTE: Aside from JLG recommendations, it is not advisable

to mix oils of different brands or types, as they may
not contain the same required additives or be of
comparable viscosities. If use of hydraulic oil other
than Mobilfluid 424 is desired, contact JLG Indus-
tries for proper recommendations.

Lubrication Specifications

Table 1-2. Hydraulic Oil

HYDRAULIC SYSTEM OPERATING

TEMPERATURE RANGE

SAE VISCOSITY GRADE

0 to +23 degrees F

(-18 to -5 degrees C)

10W

0 to +210 degrees F

(-18 to +100 degrees C)

10W-20,10W-30

+50 to +210 degrees F

(+10 to +100 degrees C)

20W-20

Table 1-3. Lubrication Specifications

KEY

SPECIFICATIONS

MPG

Multipurpose Grease having a minimum dripping

point of 350 degrees F. Excellent water resistance

and adhesive qualities, and being of extreme pres-

sure type. (Timken OK 40 pounds minimum.)

EPGL

Extreme Pressure Gear Lube (oil) meeting API ser-

vice classification GL-5 or MIL-Spec MIL-L-2105.

EO

Engine (crankcase) Oil. Gas - API SF/SG class, MIL-

L-2104. Diesel - API CC/CD class, MIL-L-2104B/

MIL-L-2104C.

HO

Hydraulic Oil. API service classification GL-3, e.g.

Mobil 424.

Advertising
This manual is related to the following products: