Chapter iii: setup wizard – AirLive WT-2000ARM User Manual
Page 11
AirLive WT-2000ARM User’s Manual
6
Chapter III: Setup Wizard
This router provides a Setup Wizard tool for user to configure the ADSL settings. This wizard collects
some ISP’s ADSL settings so that user can easy to configure the router’s ADSL settings by only
selecting the ISP vendor from the wizard.
If you cannot find your ISP from the wizard, please refer to the Section 5.1 to run the Quick Start
wizard in the web management of the router.
Before you start, please check the following items:
1. Please make sure that you have connected the ADSL cable to the router correctly. When the
ADSL cable is worked normally, the ADSL LED will be on.
2. Uninstall all of dial up programs if you have installed previously for the USB modem or other dial
up devices.
3. It is recommended to configure the router through the Ethernet cable before you have set the
wireless functions correctly.
This wizard can be run in Windows 98SE/Me/2000/XP. The following procedures are operated in
Windows XP. (Procedures are similar for Windows 98SE/Me/2000.)
1. Insert the CD shipped along with the ADSL router into your CD-ROM drive. The Autorun.exe
program should be executed automatically. If not, run Autorun.exe manually from “Autorun” folder
in the CD.
2. The following screen will be displayed. Click “Setup Wizard”.