AirLive WT-2000ARM - Manual (Page 8)

AirLive WT-2000ARM User’s Manual
3
1.4. Hardware Placement
1.4.1. Rear Panel
1) Antenna Connector
The antenna connector of the router is reverse SMA connector. It allows you to connecting an
external antenna with reverse SMA connector to the router easily.
2) Reset
The Reset button can be used to reset the router or restore to factory defaults.
z If problems occur with your router, press the router’s reset button with a pencil tip (for less
than 5 seconds) and the router will re-boot itself, keeping your original configurations.
z If problems persist or you experience extreme problems or you forgot your password, press
the reset button for longer than 5 seconds and the router will reset itself to the factory
default settings (warning: your original configurations will be replaced with the factory
default settings)
3) Power Jack
Please plug the power adapter attached with the ADSL Router to the power jack. The power
adapter is 12VDC, 1A.
4) Local Area Network (LAN)
The router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and
switches etc.
5) ADSL
Connect the supplied RJ-11 telephone line to this port and your ADSL/telephone network.