AirLive WT-2000ARM - Manual (Page 34)

AirLive WT-2000ARM User’s Manual
29
Only” or “OUT Only”.
Multicast Specify the method of transmitting data simultaneously to many
receivers. Please select “IGMP v1” or “IGMP v2” as the multicast
protocol or select “Disabled” to disable the function.
z DHCP
Parameter Description
DHCP You can enable or disable the DHCP server. By enabling the DHCP
server the router will automatically give your LAN clients an IP
address. If the DHCP is not enabled then you’ll have to manually set
your LAN client’s IP addresses.
Starting IP Address If the DHCP Server is enabled, please set the “Starting IP Address”
which will be the first IP Address assigned to the LAN client. By
default, the “Starting IP Address” is 192.168.2.100.
IP Pool Count You can select a particular IP address range for your DHCP server
to issue IP addresses to your LAN Clients.
By default, the “IP Pool Count” is 100. The IP range is starting from
IP 192.168.2.100 to 192.168.2.199.
Parameter Description
Lease Time In the Lease Time setting you can specify the time period that the
DHCP Server lends an IP address to your LAN clients. The DHCP
will change your LAN client’s IP address when this time threshold
period is terminated.
DNS Relay A Domain Name System (DNS) server is like an index of IP
addresses and Web addresses. If you type a Web address into your
browser, such as “www.router.com”, a DNS server will find that
name in its index and the matching IP address. Please select “Use
Auto Discovered DNS Server Only” to auto set the DNS Server. If
there is a DNS server that you would rather to use, please select
“Use Discovered DNS Server Only” and you need to specify the IP
address of that DNS server.
Primary DNS Server Enter the ISP’s DNS Server IP Address; or you can specify your own