AirLive WT-2000ARM User Manual
Page 15
Advertising
AirLive WT-2000ARM User’s Manual
10
9. After saving and rebooting the router, the ISP settings are all finished. This wizard will then help to
set your computer to obtain IP Address from the router automatically.
Note1: Using the router to get into the Internet, the IP Address of each PC has to be set in
the same subnet as the router. This wizard will help to set the proper IP Address to your
computer.
Note2: By default, the router’s DHCP Server is enabled. If it is disabled before running the
wizard, the wizard will enable the DHCP Server of the router automatically.
Advertising