Bosch B20CS5 - Manual (Page 24)

25
Switching on
the appliance
Switch on the appliance according
to the enclosed operating
instructions.
Disconnecting
the appliance
Disconnect the appliance according
to the enclosed operating
instructions.
If the appliance is to be
disconnected or stored at
temperatures below freezing point,
empty the water tank for the drinking
water dispenser.
Emptying the water
tank in the appliance
q Pull out the main plug.
q Cut off the water supply to the
appliance.
q Remove the motor
compartment cover from the
rear of the appliance.
q Unscrew the connecting cable
(1).
q Place a shallow waterĆcollecting
tray ( capacity approx. 0.8 gallons
(3 litres) ) under the connection
valve.
q Unscrew, drain and screw back
hose (2) and then hose (3) on
the appliance connection valve.
Important: Do not mix up the
hose connections!
q After draining the water tank,
reĆattach the motor
compartment cover.
Switch on the appliance and then
turn on the tap.