Disassembly diagram, Reassembly procedure – Tsurumi PU Submersible Vortex Sewage Pump User Manual
Page 19
-18-
Disassembly Diagram
Note:
The description of the disassembly diagram above may differ slightly in shape and con-
struction depending on the model.
Reassembly Procedure
Observe the precautions given below and reas-
semble the unit in the reverse order of disassem-
bly.
(1) Thoroughly wash all parts before reassembly.
(2) Make sure that the packing is securely fitted.
(3) Pay attention to the proper installation direc-
tion of the following part:
Spring Washer ⑤
[
Back-Pullout Construction
]
*Motor
Portion
*
Pump Portion
Hex Bolt
O-Ring
Impeller
[Pump Disassembly Diagram]
O-Ring
Truss Screw
Pump Casing
Packing
Spring Washer
Hex Nut
Hex Bolt
Screwed Flange
Hex Bolt
Impeller
4
4
2
2
A
A
B
B
1
5
6
7
3
8
9
9
10
Truss Screw
Spring Washer
Impeller
Motor Shaft
3
4
5
[Assembly direction of spring washer]