9 change password – Atop Technology MB5001C User Manual User Manual
Page 15
Advertising
User Manual Version 1.0
MB5001C series 1-port Modbus Gateway
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
14
Figure 3.11 Link1 Setup
3.2.9 Change Password
1.
Select “c” from “Input choice and enter (1~8,a~f):”. The following screen (Figure 3.12) illustrates
how to change default empty password to
“1111”.
Figure 3.12 change the password
2.
If one want to change the password, please type the old password in the “Please input old
password
” field, type the new password in the “Please input new password” and the “Please
verify new password
” fields.
Note: One can press the default key of product to reset password to the default value.
Advertising